How to Replace the Antenna on a Hytera Two Way Radios

If you own  Hytera two way radios, you might be experiencing some trouble with the antenna. In this article, we will show you how to replace the antenna on a Hytera two-way radio.

1. Remove the battery cover.
2. Disconnect the antenna cable from the radio body.
3. Remove the four screws that hold the cover in place.
4. Lift up the cover and remove it from the radio body.
5. Locate the antenna cable and disconnect it from the radio body.
6. Twist the antenna cable around a screwdriver to loosen it, then remove it from the radio body.
7. Replace the antenna on the radio body by re-inserting it into its mounting screw locations, twisting it until it is secure, and connecting the cable to the radio body.
8. Replace the cover and screws on the radio body, and re-attach the battery cover.

What is a Hytera Two Way Radio?

Hytera Two Way Radios is a type of handheld radio that is typically used for communication between vehicles and roadside service stations. The radios are also popular as communication tools for business owners, law enforcement personnel, and other professionals who need to stay connected while on the go. How to Replace the Antenna on a Hytera Two-Way Radios?

If you own a Hytera Two-Way Radio, then you know that it relies on an internal antenna to transmit and receive signals. Over time, this antenna can become damaged or lose its effectiveness. In this article, we will explain how to replace the antenna on a Hytera Two-Way Radio. Before beginning, be sure to have the following supplies on hand:

1) A Hytera Two-Way Radio with an intact antenna

2) A Phillips head screwdriver

3) A clear plastic ruler or tape measure

4) Electrical tape

5) A small hammer or nail (optional)

6) A drill with a 1/8 inch bit (optional)

7) A Phillips head screwdriver (optional)

8) An open-end wrench (optional)

9) Shorline pliers (optional)

How to Replace the Antenna on  Hytera Two Way Radios

Replacing the antenna on a Hytera two-way radio can be a quick and easy task. Follow these steps to get started:

1. Open the bottom cover of the radio.
2. Remove the antenna assembly by unscrewing the two screws located at either end of it.
3. Remove the old antenna by gently pulling it out of the radio.
4. Install the new antenna by screwing it in place with the two screws that were removed in step 2.
5. Re-install the bottom cover of the radio and enjoy your new antenna!

What to do if the Antenna Goes Out on a Hytera Two-Way Radio

If you’re experiencing poor reception or lost calls, it might be time to replace your antenna. Here’s how to do it:

1. Remove the screws that secure the antenna cover.
2. Remove the antenna cover and antenna assembly.
3. Place the new antenna onto the assembly so that the connector is facing up, then replace the screws.
4. Replace the antenna cover and screw it into place.

What to do if you can’t find the antenna

If you can’t find the antenna that came with your Hytera two-way radio, there are a couple of things you can do to try and fix the issue. You can try replacing the antenna, or you can remove the battery and replace it yourself.

If you’ve replaced the antenna, be sure to reconnect the cables and reattach the battery. If you’ve removed the battery, be sure to reattach it and turn on the radio.

How to replace the battery

If your Hytera Two-Way Radio is not currently functioning, the first thing you should do is check the battery. If the battery is correctly installed and properly connected, then the problem is with the radio itself.

The battery is located at the base of the radio and can be accessed by removing the front cover. To remove the battery, first, remove two screws that hold it in place. Once those screws are out, gently pry off the battery cover. Be sure to save any old batteries that you plan to replace as they will fit into this new cover.

To install a new battery, simply reverse these steps. Be sure to reattach the screws that hold the cover in place before replacing it on the radio.

Conclusion

If you have a Hytera two-way radio and it’s not working, there is a good chance the antenna is missing or damaged. In this article, we will show you how to replace the antenna on a Hytera two-way radio.

If you are experiencing poor reception or lost calls, it might be time to replace your antenna. Follow these steps to do so:

1) Remove the screws that secure the antenna cover;

2) Remove the antenna cover and antenna assembly;

3) Place the new antenna onto the assembly so that the connector is facing up, then replace the screws;

4) Replace the antenna cover and screw it into place.